Filter
Top Products
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Connecting the Firewall to the Internet 2-3
v1.0, September 2007
2. Restart your network in the correct sequence
a. First, plug in and turn on the cable or DSL modem.Wait about 2 minutes.
b. Now, plug in the power cord to your FVG318 and wait about 30 seconds.
c. Last, turn on your computer.
d. Check the status lights and verify the following:
Figure 2-3
Warning: Failure to restart your network in the correct sequence could prevent you
from connecting to the Internet.
Note: For DSL customers, if ISP-provided software logs you in to the Internet,
do not run that software. You may need to go to the Internet Explorer®
Tools menu, Internet Options, Connections tab page where you can select
the “Never dial a connection” radio button and click Apply.
Figure 2-4
D
C
Power
Test
Internet Port
Local Ports (8)
Wireless