Filter
Top Products
GS108T Hardware Installation Guide
2-2 Physical Description
v1.0, January 2010
Figure 2-2 illustrates the NETGEAR GS108T Smart Switch back panel:
Power Connector
Figure 2-2
The back panel contains a DC input for the supplied 12V/1A external power adapter.
LED Designations
Port LEDs
The following table describes the port LED designations.
Table 2-1. Port LEDs
LED Designation
100 Mbps Link/ACT (Left LED) • Off - No 100 Mbps link is established on the port.
• Solid Green - A valid 100 Mbps link is established on the port.
• Flashing Green - Packet transmission or reception is occurring on
the port at 100 Mbps.
10 Mbps Link/ACT (Right LED) • Off - No 10 Mbps link is established on the port.
• Solid Green - A valid 10 Mbps link is established on the port.
• Flashing Green - Packet transmission or reception is occurring on
the port at 10 Mbps.
1000 Mbps Link/ACT (Both LEDs) • Off - No 1000 Mbps link is established on the port.
• Solid Green - A valid 1000 Mbps link is established on the port.
• Flashing Green - Packet transmission or reception is occurring on
the port at 1000 Mbps.