Filter
Top Products
GS108T Hardware Installation Guide
Installation 4-5
v1.0, January 2010
Step 6: Managing the Switch using a Web Browser or the PC
Utility
The GS108T Smart Switch contains software for viewing, changing, and monitoring the way it
works. This management software is not required for the switch to work. The ports can be used
without using the management software. However, the management software enables the setup of
VLAN and Trunking features and also improves the efficiency of the switch, which results in the
improvement of its overall performance as well as the performance of the network.
After powering up the switch for the first time, the Smart Switch can be configured using a Web
browser or a utility program called Smart Control Center. For more information about managing
the switch, see the GS108T Software Administration Manual on the Smart Switch Resource CD.
Note: When the device powers up, there is a default IP address already configured on the
device. The default IP address is 192.168.0.239 and subnet mask 255.255.255.0.