NETGEAR GSM7248R Switch User Manual


 
Managed Layer 2 Switches GSM7224R and GSM7248R Hardware Installation Guide
2-6 Hardware Installation
v1.0, November 2007
SFP Modules
The module bay accommodates a standard SFP module with an LC connector that is compatible
with the IEEE 802.3z 1000BASE-X standard.
SFP modules are sold separately.
To install an SFP module insert the SFP module into the module bay. Press firmly to ensure that
the module seats into the connector.
Connecting a Redundant Power Supply (RPS)
Each switch has a redundant power supply (RPS) connector and a power receptacle on the rear.
Figure 2-2
Figure 2-3
Power receptacle
Redundant
power supply
connector