NETGEAR DG814 Network Router User Manual


 
Reference Manual for the Model DG814 DSL Modem Internet Gateway
1-2 Introduction
Blocking can be scheduled by day and time
Network Address Translation (NAT) hides local PCs from the Internet
Incoming port forwarding and DMZ for specific services
Built in 4-port 10/100 Mbps Switch
Allows LAN connections at 10 megabits per second (Mbps) or 100 Mbps
Autosensing for Ethernet (10BASE-T) or Fast Ethernet (100BASE-Tx) transmissions
Half-duplex or full-duplex operation
Direct connection to the wide area network (WAN) using the built-in ADSL modem
Protocol Support
IP routing
Network Address Translation (NAT) for operation with a single static or dynamic IP
address
Dynamic Host Configuration Protocol (DHCP) server for dynamically assigning
network configuration information to PCs on the LAN
DHCP client for dynamically obtaining configuration information from the Internet
Service Provider (ISP)
DNS Proxy for simplified configuration
PPP over Ethernet (PPPoE) support
PPP over ATM (PPPoA) support
Classical IP support
Login capability
Automatically executes user login for:
Automatically executes user login for PPP over Ethernet or PPP over ATM accounts
Easy, web-based setup for configuration
Front panel LEDs for easy monitoring of status and activity
Flash memory for firmware upgrade
Free technical support seven days a week, twenty-four hours a day