NETGEAR DS104 Switch User Manual


 
Model DS104/DS106/DS108/DS116 Dual Speed Hub Installation Guide
The NETGEAR
Model DS104, Model DS106, Model DS108, and Model
DS116 Dual Speed Hubs are network hubs that enable users to mix and match
10 and 100 megabit per second (Mbps) devices on the same network. This
capability eliminates the high cost and complexity of separate network
equipment for 10 and 100 Mbps users. These four hubs, also known as the
DS100 Series hubs, are ideal for small networks in transition from 10 to 100
Mbps and for linking networks operating at different speeds.
All four hub models connect PCs to share printers, files, Internet access, and e-
mail communications. Each network port coordinates with the connected PC to
run at 10 or 100 Mbps, making network configuration and upgrade effortless. In
addition, the 10 and 100 Mbps network segments are internally bridged to form
one network, providing full connectivity among all users.
The DS100 Series hubs have the following key features:
Per port, autosensing, dual-speed (10/100 Mbps) operation
IEEE 802.3u standard compliance for interoperation with all 100BASE-TX
Fast Ethernet (100 Mbps) products and 802.3i standard compliance for
interoperation with all 10BASE-T Ethernet products
Easy Plug-and-Play installation with no software to configure, saving time
and minimizing the potential for configuration errors
Ability of each port on the hub to independently detect the speed of the
attached device and to automatically connect at the appropriate speed
Internally bridged 10 and 100 Mbps network segments to form one network,
providing full connectivity among all users
Chassis equipped with:
Four (Model DS104), six (Model DS106), eight (Model DS108), or 16
(Model DS116) 10BASE-T or 100BASE-TX ports to provide fast
information exchange, resource sharing, and client or peer-to-peer
communication using simple Category 5 UTP wiring
Built-in vista LEDs on each network port clearly indicating individual
port status
Additional LEDs providing network traffic status for the hub
Two LED bar graphs (on the Model DS104, Model DS106, and Model
DS108 only) providing online status of network utilization and alerting
you to potential network overload
Normal/Uplink push button for simplifying network extension
Compact, durable design that enables tabletop or wall mounting
Limited five-year warranty on the hub and three-year warranty on the power
adapter
Start Here
Features