NETGEAR ReadyNAS 2120 v2 Network Router User Manual


 
7. Configure the TCP/IP settings as explained in the following table.
NETGEAR recommends that you use DHCP address reservation to make sure that
the DHCP server always assigns the same IP address to the interfaces of the
Note:
ReadyNAS.The MAC addresses of the physical interfaces are shown on the Network
screen.
If you enter an IP address manually, you must provide DNS server information if you
want to access your ReadyNAS system over the Internet. For more information, see
Note:
DNS on page 153. If the IP address changes, your browser loses its connection to
your storage system. To reconnect to your ReadyNAS system, use ReadyCLOUD
to rediscover your device. See Discover and Set Up Your ReadyNAS on page 13.
System Settings
155
ReadyNAS OS 6.2