Filter
Top Products
System Maintenance
217
ReadyNAS OS 6.1
• Update. Select how often the information in the graphic is updated. You can select from 1
to 30 minutes.
Network
The Network throughput graphic shows the network usage for Tx and Rx traffic in bytes per
second.
The range is flexible and depends on your selections from the drop-down lists above the
graphic. For example, the range can be 0 to 60 bytes or from 0 to 40 KB. The upper part of
the graphic indicates the incoming (Rx) traffic; the lower part of the graphic indicates the
outgoing (Tx) traffic.
From the drop-down lists above the graphic, you can adjust the following settings:
• Network. Select all network interfaces, individual interfaces, or individual bonds.
• Protocol. Select all protocols or individual protocols (SMB, NFS,
AFP, HTTP, HTTPS,
SSH, iSCSI, or SMTP).
• Period. Select the period over which the network usage is measured.
You can select
from 5 minutes to 1 year.
• Update. Select how often the information in the table is updated.
You can select from 1 to
30 minutes.