Filter
Top Products
Using the Setup Wizard 15
2. Click Send Test Message to verify that alert messaging is working. If you do not receive the
test message, check the network gateway and DNS settings.
Some network firewalls prevent unknown message transfer agents (MTAs) (such as those used
by the ReadyNAS Duo) from working. If this is the case, you will need to specify a remote
SMTP server in Advanced Control mode when you are done with the Setup Wizard. This
method is covered in the ReadyNAS Duo User Guide.
3. Click Next to access the Ethernet Network screen.
Figure 19
Various email services may filter out the test message and actual email alerts sent
by the ReadyNAS Duo. Verify that the test message arrives at the email
destination before continuing.