Filter
Top Products
16 Using the Setup Wizard
Configuring Your Network
Ethernet Settings
To configure your Ethernet settings:
1. You can accept the default Ethernet settings if the ReadyNAS Duo is installed in a network
environment where DHCP service is used. Otherwise, specify a static address.
If you assign static IP addresses, be aware that the browser will lose connection to the
ReadyNAS Duo device after the IP address has been changed. If you encounter this problem,
click Rescan in RAIDar to rediscover the device and reconnect from there.
2. Click Next to access the Global Settings screen.
Global Settings
The Global Settings screen allows you to specify the ReadyNAS Duo host name, default gateway
and DNS servers.
To set the Global Settings:
1. Enter a hostname that you wish to advertise the ReadyNAS Duo on your network. This
hostname can be used in place of the IP address when accessing the ReadyNAS Duo from
Windows, or over OS X using SMB. This is also the name that will appear in the RAIDar scan
list.
Figure 20