Filter
Top Products
NETGEAR 108 Mpbs Wireless USB 2.0 Adapter WG111T User Manual
2-14
v2.0, February 2007
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WPA2-PSK [AES].
For more information about WPA2-PSK security, see the Web link to “Wireless
Communications” in Appendix B.
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply and then click Close to exit the Smart Wizard.
Setting up WPA-PSK Security
Follow the steps below to configure WPA-PSK Security.
1. Run the WG111T Smart Wizard.
Figure 2-10
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.