Filter
Top Products
Installation and Basic Configuration
12
Wireless N150 Access Point WN604
Log In to the Access Point
The access point is set, by default, with the IP address of 192.168.0.100 with DHCP disabled.
To log in to the access point:
1. Prep
are a computer with an Ethernet adapter.
a. If this comp
uter is part of your network, record its TCP/IP configuration settings.
b. Config
ure the computer with a static IP address of 192.168.0.210 and 255.255.255.0
for the subnet mask.
2. Connect an Ethern
et cable from the access point to the computer.
3. Power up the access point.
a. Connect the
power adapter and plug it into an electrical outlet.
b. Make su
re that the Power On/Off button on the rear panel is in the On position
(pressed in).
4. V
erify the following:
• Th
e Power LED is on.
• Th
e LAN LED is on for the LAN port that is connected to your powered-on computer.
• Th
e WiFi LED is blinking.
5. Lau
nch a web browser and enter http://192.168.0.230 in the address field. You are
prompted to log in:
6. Type admin in the User name field and password in the Password field, both in lower-case
letters, and click Login.
Downloaded from www.vandenborre.be