Filter
Top Products
Getting Started
6
Universal Dual Band WiFi Internet Adapter (WNCE3001)
Power Connection Options
You can power on your Internet adapter using either of these methods:
• Connect the WNCE3001 to an electrical outlet with the included power adapter.
Figure 3. Power adapter
• Connect the WNCE3001 to any USB port with the included USB power cable:
Figure 4. USB power cable
Note: Make sure that the device where you connect the USB power cable
is powered on. Some USB ports on consumer electronic devices
cannot provide the power that the Internet adapter requires. In such
cases, the LED turns solid red, and the Internet adapter might reset
itself or turn itself off. Even if the Internet adapter is powered on
successfully, you might experience continuous disconnection during
file transfer. If this happens, try connecting the USB cable to a
different device, or use the Internet adapter power adapter instead.
Installation
The Universal Dual Band WiFi Internet Adapter (WNCE3001) Installation Guide, included in
the package, explains how to install your Internet adapter. The steps are summarized in this
section.