Filter
Top Products
N600 Wireless Dual Band Router WNDR3400 Setup Manual
Configuring Your Wireless Network 22
A login window similar to the one shown below will display.
2. When prompted, enter the default Password (admin is the default router User Name and
password is the default router Password), both in lowercase letters. If you changed the
Password from the defaults, then enter your new Password.
The Firmware Upgrade Assistant screen will display.
3. Click Yes to check for new firmware (recommended). The router will automatically check the
NETGEAR database for a new firmware image file. If no new firmware version is available,
the message “No New Firmware Version Available” will display. (If you selected “No,” you
can check for new firmware later; see “Configuring Your Wireless Settings and Security
Options” on page 23.)
4. If new firmware is available, click Yes, and the router will automatically upgrade itself with
the latest firmware.
Figure 13
The router User Name and Password are unique to the router and are not the
same as any other User Name or Password you may use to log in to your
Internet connection.
Do not try to go online, turn off the router, shut down the computer, or do
anything else to the router until the router finishes restarting and the Ready light
stops blinking!