Filter
Top Products
N600 Wireless Dual Band Router WNDR3400 Setup Manual
Getting to Know Your Wireless Router 3
Front Panel
You can use the status lights on the front of the wireless router to verify various conditions.
Figure 2
Table 1. Status Light Descriptions
Item Function Activity Description
1.
Power Solid Amber The unit is starting up after being powered on.
Solid Green The unit startup has completed; the unit is ready.
Blinking Green Firmware is corrupted. See “Checking Basic Router Functions” on
page 31 for instructions on restoring your router firmware.
Blinking Amber
1. Firmware is upgrading.
2. Restore factory settings button pressed; restoring factory default
settings.
Off Power is not supplied to the router.
2.
2.4 GHz
Mode
Solid Green The unit is operating in 11n mode at 2.4 GHz.
Blinking Green Data is being communicated over a wireless network.
Off The 11n mode at 2.4 GHz is off.
3.
5 GHz
Mode
Solid Blue The unit is operating in 11n mode at 5 GHz.
Blinking Blue Data is being communicated over the wireless network.
Off The 11n mode at 5 GHz is off.