Filter
Top Products
7-4 User’s Reference Guide
Creating a new Connection Profile
For a Netopia 4541/4542, connection profiles are useful for configuring the connection and authentication
settings for negotiating a PPP connection on the ADSL link. If you are using the PPP data link encapsulation
method, you can store your authentication information in the connection profile so that your user name and
password (or host name and secret) are transmitted when you attempt to connect.
Connection profiles define the networking protocols necessary for the router to make a remote connection. A
connection profile is like an address book entry describing how the router is to get to a remote site, or how to
recognize and authenticate a connection. To create a new connection profile, you navigate to the WAN
Configuration screen from the Main Menu, and select Add Connection Profile.
The Add Connection Profile screen appears.
On a Netopia 4541/4542 you can add up to 15 more connection profiles, for a total of 16, but you can only use
one at a time, unless you are using VPNs.
1. Select Profile Name and enter a name for this connection profile. It can be any name you wish. For
example: the name of your ISP.
2. Toggle Profile Enabled to Yes or No. The default is Yes.
Main
Menu
WAN
Configuration
Add Connection
Profile
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Data Link Encapsulation... PPP
Data Link Options...
IP Profile Parameters...
COMMIT CANCEL
Configure a new Conn. Profile. Finished? ADD or CANCEL to exit.