Filter
Top Products
NTI RACKMUX-V15/17 RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE
14
Figure 16- German keyboard with numeric keypad
PS/2-USB Keyboard/Mouse Mode
The RACKMUX keyboard and mouse can be configured to connect to either a PS/2 or USB enabled CPU. At initial power ON
from the factory, the keyboard will be in PS/2 mode.
To toggle keyboard mouse mode when standard condensed keyboard is present
1. Press the "Fn" key twice quickly (double-click). The "Fn" LED will illuminate.
2. To toggle the keyboard to USB mode, depress and hold the “T” key for at least 7 seconds. The “USB” LED will
illuminate. Release the “T” key.
3. To toggle the keyboard back to PS/2 mode, press and hold the “T” key again for at least 7 seconds. The “PS/2” LED
will illuminate. (See Fig. 11 on page 10.) Release the “T” key.
To toggle keyboard mouse mode when Numeric Keypad is present
1. To toggle the keyboard to USB mode, depress and hold the “Fn“ key (“Fn” LED will illuminate) and the “T” key for at
least 7 seconds. The “USB” LED will illuminate. Release both keys.
2. To toggle the keyboard back to PS/2 mode, press and hold the “Fn” and “T” keys again for at least 7 seconds. The
“PS/2” LED will illuminate. (See Fig. 11 on page 10.) Release both keys.
Note: In the event of a power failure, the RACKMUX will power up the keyboard in the mode it was last configured for.
u
Esc
F1
F2
F3
F4
F5 F6 F7
F8
F9 F10
F11 F12
Pause
Untbr
Rollen
=
0 }
)
9 ]
(
8 [
/
7 {
&
6
%
5
$
4
3
"
2
Tab
Alt
Fn
AltGr
Ende
:
.
;
,
YXCVB
N
M
ASDF GH JK L
Q
@
WE R
T
ZU I OP
Pos1
Bild
Ende
Entf Einfg
Num
Enter
+
-
*
/
789
456
123
0
.
'
#
Bild
Pos1
Bild
Bild
Einfg
Druck
S-Abf
Entf
?
\
Strg
!
1
2
3
U
*
+ ~
O
A
>
<
^