Filter
Top Products
NTI NODEMUX MULTI-USER UNIVERSAL KVM SWITCH
17
COMMAND MODE FUNCTIONS (Cont'd)
Key/Sequence Function
Ctrl-S
Scan Mode enable/disable (to begin scanning, simply exit COMMAND Mode after enabling
the function – Scroll Lock status light will blink when scanning)
F1
Display HELP menu (available within every control mode)
Ctrl-P-x-x
Selects a specific port. xx = port number as a two digit number (ex. p01, p08, p15, etc.)
Ctrl-T-x-x-x
Selects the scan time in seconds. xxx = time in seconds between 2 (002) and 255
Home
Selects the first port on the switch
End
Selects the last port on the switch
Alphanumeric
Typing any alphanumeric enters Search Mode and adds a character to search string and
selects the CPU’s name that matches best
Enter
Switch to a selected port
Esc
Exit keyboard command mode
The mouse can be used to control command mode as well as the keyboard. The mouse cursor can be moved to the Help and
Exit fields, which can be then clicked on to perform that function. The port that is on the screen can be selected by moving the
cursor onto that port and clicking. Clicking twice on a selected port will switch to that port and exit COMMAND Mode. To change
the displayed ports on the screen click on the up and down arrows that are located to the right of the port names displayed.
Note: Exit COMMAND Mode to type to a CPU. To exit COMMAND Mode, press <Esc>, or press <Ctrl> + <` >(accent) keys
simultaneously or by clicking the “ESC” command on the screen with the mouse.
Note: When in SCAN Mode, stop the SCAN cycle temporarily by typing or moving the mouse. That CPU will remain
selected on that port as long as there is typing or mouse movement. SCAN will continue after all keyboard or mouse
activity ceases and the configured scan time (from chart above) expires.
Edit Mode
Edit mode (press <Ctrl> - <E> from Command Mode menu) allows the user to modify the names of the CPUs connected to the
switch. Names of CPUs can be up to 12 characters in length. When in Edit mode, multiple keystroke combinations are not valid
(<SHIFT>+<P>, <CTRL>+<P>, <ALT>+<P>, and <P> will all type a “P” to the display - lower case letters cannot be typed). After
changes have been made, answer the question asked. Answer "Y" to save changes and answer "N" to continue using previously
entered port names. The <Esc> key will exit EDIT Mode and abort any EDIT session.
Key/Sequence Function
→
Move cursor one position to the right
←
Move cursor one position to the left
↑
Previous port on OSD display
↓
Next port on OSD display
Home
Selects the first port on the switch
End
Selects the last port on the switch
Insert
Toggles between insert (character gets inserted and the remainder of the name gets shifted to the right)
and overstrike (current character gets overwritten)
Delete
Erase current character
Backspace
Erase previous character