Filter
Top Products
NTI NODEMUX MULTI-USER UNIVERSAL KVM SWITCH
26
KEYBOARD MAPPING
The keyboard configuration of each CPU is saved in the NTI Switch. For example, if the CPU attached to Port 4 had CAPS LOCK
and NUM LOCK selected the last time that CPU was accessed, then they will automatically be set when that CPU is accessed
again.
Key Equivalents
Using the chart below, find the character needed to be typed on the CPU being accessed, then follow the row across for the
equivalent on the keyboard device being used. (See Fig. 10 on page 27 for reference.)
PS/2 101 WINXX SUN Keyboard
L-Ctrl L-Ctrl L-Ctrl
L-Alt L-Alt L-Alt
R-Ctrl R-Ctrl Compose
R+Alt R+Alt/Aplcn Alt-Graph
SB+Alt Logo Meta
SB+RT Arrow SB+RT Arrow Power
SB = Space Bar
L and R = Left and Right keys when two keys are marked the same on a keyboard.
SUN's Startup Keys
With a Sun keyboard attached to the switch, the following emergency startup keys are supported:
Key Function Key Function
Stop Bypass POST Stop-F Enter Forth on TTYA instead of probing
Stop-A Abort Stop-N Reset NVRAM contents to default values
Stop-D Enter diagnostic mode
This switch will also support other startup commands not listed above.
SUN’S 14 EXTRA KEYS
Use the chart below to type SUN’s additional 14 keys using a PS/2 101 or a WIN95 keyboard (SB= Space Bar)
PS/2,Win,Mac
Keyboards
Sun Extras PS/2,Win,Mac
Keyboards
Sun Extras
SB+F1 Stop (L1) SB+F8 Paste (L8)
SB+F2 Again (L2) SB+F9 Find (L9)
SB+F3 Props (L3) SB+F10 Cut (L10)
SB+F4 Undo (L4) SB+F11 Help
SB+F5 Front (L5) SB + UP Arrow Vol +
SB+F6 Copy (L6) SB + DOWN Arrow Vol -
SB+F7 Open (L7) SB + LEFT Arrow Mute