Network Technologies UNIMUX-DVI-x Switch User Manual


 
NTI UNIMUX SERIES USB KVM SWITCH
7
RS232 Connection
If the RS232 option is installed, connect one end of the CAT5 patch cable (supplied) to the port labeled “RS232” on the rear of the
UNIMUX. Plug the other end of the CAT5 cable into either the RJ45-to-DB9 or RJ45-to-DB25 adapter supplied, and connect the
adapter to the RS232 port on the control terminal. Follow the instruction under “RS232 Control” on page 12 for configuration and
use of the RS232 control feature.
Figure 7- Connect RS232 control terminal
Rear View of UNIMUX-DVI-8
-
+
CPU 1CPU 2CPU 3CPU 4CPU 5CPU 6CPU 7CPU 8
VIDEO 1VIDEO 2VIDEO 3VIDEO 4VIDEO 5VIDEO 6VIDEO 7VIDEO 8
RS232
5VDC
VGA
Multi-Scan
Monitor
Control Terminal
RJ45-to-DB9 Adapter
(supplied)
CAT5 Patch Cable
(supplied)
RJ45-to-DB25 Adapter
(supplied)
or