Network Technologies UNIMUX-USBV-2 Switch User Manual


 
NTI UNIMUX 2-PORT USB KVM SWITCH
12
TECHNICAL SPECIFICATIONS
USB Type B USB Type A VGA Video
Pin # Signal Pin # Signal Pin # Signal Pin # Signal
1 +VCC
1 +VCC
1 RED 9 NC
2 - DATA
2 - DATA
2 GREEN 10 GND
3 +DATA
3 +DATA
3 BLUE 11 ID0
4 GND
4 GND
4 ID2 12 ID1
5 TST 13 HS
6 RED GND 14 VS
7 GREEN GND 15 ID3
8 BLUE GND
NOTE: UNIMUX-USBV-2 is fully compliant with USB standards (1.0, 1.1)
TROUBLESHOOTING
1. Verify all cables are securely connected and that the installation procedure was carefully followed.
2. If a CPU seems to be locked up,
cycle the power to the UNIMUX-USBV-2 OFF, then ON.
unplug the "USB DEVICES" keyboard and mouse cables (not the "CPU x" keyboard and mouse) from the UNIMUX-
USBV-2 and reconnect them.
reset default values as described on page 7.
reboot the CPU
If the NTI UNIMUX-USBV-2 still seems work improperly, help may be found in the Frequently Ask Questions (FAQ’s) section
of our website at http://www.networktechinc.com or call us directly at (
800) 742-8324 (800-RGB-TECH) or (330) 562-7070
and we will be happy to assist in any way we can.
21
43
Mating face of a USB Type B Female
Mating face of a USB Type A Female
1
2
34
Mating face of a 15HD female
VGA VIDEO
4
2
3
51
10
98 6
7
15
14
13 12 11
Barrel
(Inside
barrel)
(Outside
barrel)
Power Connector
2.1 mm x 5.5 mm Female
5VDC @ 2.0A OUTPUT