©2001 Nokia Mobile Phones. All rights reserved.
Getting started
11
Getting started
Placing the terminal
Caution: In order to comply with RF exposure requirements, install the terminal so that a minimum
distance of 20 cm can be maintained between the antenna and all persons. If you use an external
antenna, install the antenna so that a minimum distance of 20 cm can be maintained between the
antenna and all persons, with antenna gain not exceeding 3 dBi.
Place the terminal in a proper location, for example on the desk far enough from your PC.
It is also possible to install the terminal to a wall:
1 Choose a location far enough from electronic devices so that
no interference takes place.
2 Drill appropriate screws through the three indentations on the
cradle.
Note: The three small holes are not for wall mounting but for
mounting the terminal on the cradle.
3 After you have secured the cradle to the wall, mount the terminal as described above in section
”Mounting the terminal”.
Note: All radio transmitting devices send signals which may cause interference in different electronic
devices ( PC, television etc). To avoid interference, place the terminal far enough from other electronic
devices.