Filter
Top Products
Getting started
10
■ Resetting headsets
Reset clears all pairing and user data information. To reset the
adapter, press and hold the Control key for 10 seconds. The
reset is confirmed with an alternating red and green blink for
another 10 seconds.
Your headset may accept only a limited number of pairings and
may need to be reset to make the pairings. For resetting your
headset, refer to the user guide for the headset.
■ Switching the Nokia wireless audio
adapter off
You can also switch the adapter off, if for instance the adapter
will not be used for a while. If you want to switch the adapter
off, press the Control key for 2 seconds. The adapter blinks
once red and disappears from the phone display. When the
adapter is turned off, the phone operates as if there was no
adapter attached to it. To switch the adapter back on, press the
Control key once.
■ Modes of the light indicator
The light indicator has the following modes:
• Slow red blink (on for 0.2 seconds, off for 5 seconds)
The adapter is in the Init mode. This means that the
adapter is attached to a phone. The adapter stays in the
Init mode permanently until you press the Control key to
search for a new headset or switch off the adapter.
AD-5B_En_1st_tab.fm Page 10 Friday, April 9, 2004 2:57 PM