Filter
Top Products
Getting started
9
English
The headset whose passkey you enter first becomes the
default device for the Wireless Audio Adapter.
The Wireless Audio Adapter and the headset are now ready
to be used.
Note that all audios, including the call alert tones, are now
routed to the headset.
4. If the pairing is unsuccessful, either press the Control key
once briefly or detach the adapter from your phone and
start the pairing procedure again from step one above.
Pairing multiple headsets
To pair another headset to the adapter, repeat the procedure
above. However, make sure that the headset that has already
been paired is turned off, and that only the new unpaired
headset is within a 10 metre range of the adapter. Note that
the adapter can be simultaneously paired with two headsets
only.
When using the headsets, the adapter first tries to find the
default user, which is the first paired headset, and then the
secondary headset. If you want to pair more headsets, the new
headset replaces the secondary user. You can replace the
secondary user as many times as you want. If you want to
replace the default user, you need to reset the adapter. Note
that since the reset clears the memory of the adapter, the
secondary user is reset as well.
AD-5B_En_1st_tab.fm Page 9 Friday, April 9, 2004 2:57 PM