Filter
Top Products
Getting started
7
English
■ Using the adapter for the first time
Before you can use the Wireless Audio Adapter, you need to
associate, "pair", it with the headset you want to use. The
compatible headset must support Bluetooth Specification 1.1.
For pairing you need the adapter, a compatible phone, and the
headset including its PIN code. You only need to pair each
individual headset once.
Attach the Nokia Wireless Audio Adapter into the Pop-Port
connector of your phone. Note that your phone should be in
standby mode, ready to use, and it should not have any
characters keyed in. The adapter blinks once briefly in green to
indicate that the power is on. If the adapter has not been
paired with any headsets, the state is indicated with a slow,
continuous red blink.
Note that if you have the
keylock of your phone on,
the keylock is automatically
deactivated after you have
attached the adapter into
the phone. Note also that if
you have the Silent profile
on in your phone, the
automatic answering does
not work. Also Lights off mode in your phone should be
activated, because having the lights continuously on reduces
the battery life.
AD-5B_En_1st_tab.fm Page 7 Friday, April 9, 2004 2:57 PM