Filter
Top Products
Commissioning
DN0445814 © Nokia Corporation 31 (60)
Issue 2-0 en Nokia Proprietary and Confidential
Note
Default password for DNT2Mi-fp protection is DNT2Mi, and it can change by
menu option (Q1: 10,4,3).
6.6 Measurements
After all the settings have been checked, it is recommended that you carry out a
line quality and BER test.
Before starting the BER test, reset all statistics and error counters. Read statistics
and error counters after the BER test.
Noise margins, Rx and Tx line levels, and attenuations (Q1: 7,1...4)
Establish a link between two units. After the line is up, check the noise margin,
Rx level, and line attenuation from the Measurements menu.
After the tests
Check that all alarms have disappeared and the statistics are still correct.