Filter
Top Products
May 2003 Preinstallation requirements
Part 2: 702t Server Hardware Installation 35
4 Review the slot locations (see “Rear panel diagram” on page 13).
5 Do one of the following:
IF THEN
you observe any damage contact your Nortel Networks technical
support representative.
components have become
loose
secure them. Then replace the server
cover and proceed with the hardware
installation.
Refer to the procedures in Part 5 of the
CallPilot Installation and Configuration
binder.
you are satisfied that the
702t server has arrived
at your site undamaged
replace the server cover and proceed with
the hardware installation.
See “Installation checklist” on page 26.