Filter
Top Products
WLAN—Access Point 2330s 85
Nortel WLAN—Series 2332 Access Points Quick Installation
1 Use the mounting template to cut a hole for the CAT-5 Ethernet cable.
2 Install the T-bar clamp that fits the T-bar.
3 Remove the mounting bracket from the access point.
4 Attach the mounting bracket to the T-bar clamp.
23.9-mm (15/16 inch) or 14.2-mm (9/16 inch) T-bar
15.9-mm (5/8 inch) T-bar
(The clamps are different widths but the assembly is the same.)
T-bar
T-bar clamp halves
Slide together
840-9502-0066
T-bar
T-bar clamp halves
Slide together
840-9502-0003
840-9502-0011
840-9502-0008
T- bar
T-bar clamps
(attached
to T-bar)
Universal mounting
bracket
840-9502-0012
(Viewed from above ceilin
g
tiles, lookin
g
down.)
Port connector
opening
T- b a r
Universal mounting bracket
840-9502-0004
Port connector
opening