Filter
Top Products
41
Setting Up the BayStack Instant Internet 400 Unit
Chapter 4
DIP switch settings
This chapter describes the Dual Inline Pins (DIP) switch settings for your Instant
Internet 400 unit, including those for normal operation, for setting the token ring
speed, and for resetting your unit’s password and configuration settings.
DIP switches
DIP switches enable you to configure your Instant Internet unit for a particular
type of operation. There are eight DIP switches on the rear panel of your unit
(Figure 6). The switches are labeled left to right from 1 to 8.
Figure 6 DIP switches on the rear panel of the unit
The switches have two possible positions: on and off. For the Instant Internet 400
unit, the on position is up and the off position is down. Use a small instrument
with a fine point, such as a pen nib or small screwdriver, to move the switches to
the proper position. Labels on the unit indicate whether a switch is on or off, and
the specific switch pattern indicates a specific configuration item.
9870EA
1 2 3 4 5 6 7 8
On
Configure
Off