Filter
Top Products
Nautica 200 Installation Guide
117236-B Rev. 00 3
Site Preparation
You should install the Nautica 200 on a flat surface, in a clean,
dry location with no extreme temperatures. Make sure that all of
the required services (power, LAN access, ISDN and any
telephones, facsimiles and modems) are available and working
correctly.
Make sure that there is sufficient space on all sides of the Nautica
200 to ensure that it does not exceed the maximum temperature
(Table 1
).
Table 1
lists the operating requirements for correct installation of
the Nautica 200.
Table 1. Operating Requirements
Parameter Specification
Power supply: Europe 220 to 240 VAC, 50 Hz (nominal)
Power supply: North America 110 VAC, 60 Hz
Power supply current 41 mA @ 240 VAC
90 mA @ 110 VAC
Power consumption 10 W (nominal)
Operating temperature 10
o
to 40
o
C (50
o
to 104
o
F)
Humidity 5% to 95% (nonconducting)
LAN cable (maximum length) 100 m Cat 3 or 5
Telephone ports (two) You can connect a facsimile,
telephone or modem to these
ports.(Not Australian Version)
Note:
Before you begin the installation, make sure you have
everything you need. See "
Checklist" on page 2.