Filter
Top Products
Nautica 200 Installation Guide
117236-B Rev. 00 9
6. If the Installation Assistant does not start automatically,
double-click on the Nautica Wizard icon, click on the
Nautica 200 icon in the Nautica Wizard window, then
click on the Configure button at the bottom of the Nautica
Wizard window.
For more information about Nautica Wizard and the Installation
Assistant, see the online Help in the programs and the online
documentation (Nautica Wizard Configuration Reference Guide)
on the CD that came with your Nautica 200 package.
Additional Information
The information outlined in this section highlights operational
features that you need to be aware of before using the
Nautica 200.
Setting up e-mail
Most TCP/IP based e-mail clients can be configured to check the
mail server for new mail at set intervals. This is known as polling.
Note:
The Nautica Configuration Wizard CD auto-run feature
causes the installation software to run every time the CD is
inserted. If you do not want to re-install the software, cancel out
of the installation process once it is initialized.
Note:
If you intend to use Network Address Translation (NAT),
in the Installation Assistant, select the standard routing option,
give the unit an IP address and then click on the Finish button.
Next, click on Advanced > NAT and set up the NAT
information. For more details on NAT, refer to the online
documentation on the CD.