Using the Passport 8100 Modules
1-4 204515-C
• A command line interface (CLI) for managing the Passport 8100 switch,
accessible through the Passport 8190SM module or through a Telnet
connection
If a Passport 8190SM module is not installed, the CLI is accessible through
the Comm port on the Passport 8132TX module.
• Support for up to eight simultaneous Telnet sessions with optional password
protection
• Device Manager support
• Web-based monitoring support
• SNMPv1 and SNMPv2 agent support
• Upgradable device firmware in nonvolatile flash memory using the Trivial
File Transfer Protocol (TFTP)
• Optional PCMCIA card for file management
• Up to 2,000 VLANs defined by port or network protocol
Passport 8190SM Management Module
The Passport 8190SM Switch Management Module (Figure 1-1) provides
centralized management capabilities for the Passport 8010 and 8006 chassis. Use
this module to configure and manage all 8100 Series modules in the chassis.
Figure 1-1. Passport 8190SM Switch Management Module
9673EA
OnlineTemp2
Fan
1
MasterPower Supply
10025 50 75
3
21
Modem (DTE)
PCMCIA
Utilization %
CPU
Link
100
Reset
Console
DCE|DTE
Management
1 2 3 4 5 6
1 = Ethernet Management Port
2 = DCE/DTE Switch
3 = Console/Modem Ports
4 = Reset Button
5 = PCMCIA Card Slot
6 = LEDs