N-Tron 102PC-SE Network Card User Manual


 
Rev. 041008
15
CLI TREE of MENUS
¾ Set (Set configurable fields)
o ag-server (Configure ag-server)
enable/disable (enable or disable ag-server)
o auto-discovery (Configure auto-discovery feature)
broadcast-timer (set the broadcast timer)
enable/disable (enable or disable auto-discovery)
server-port (set the server’s port number)
o boot-messages (Setup boot messages)
enable/disable (enable or disable boot-messages)
o bridge (Configure bridge modes)
enable/disable (enable or disable bridge mode)
ipmodule ip-address (Configure the bridge’s ip address)
o date (Configure the date in DD/MM/YYYY format)
o device-parameter (Set new device parameters, up to 99)
o ftp (Configure FTP information)
machine (remove FTP login options)
filename (specify the filename)
filesize (specify the file size)
directory (specify a directory)
o login (Configure login settings)
auto-dialout-login (enable or disable auto-dialout-login)
enable/disable (enable or disable login feature)
o ip (Configure IP settings for the Ethernet port eth0)
auto-dialout (enable or disable the auto-dialout feature)
def-gway (setup the default gateway in the format of xxx.xxx.xxx.xxx)
dns (enable or disable the DNS features below)
hostname (setup the 102PC-SE’s hostname)
http (enable or disable the webpage options)
http-page (display the serial page or the default page)
http-port (configure the port number that the web page is broadcasted over)
http-banner (set a string to be the http banner)
pri-dns (setup the primary DNS server in the format of xxx.xxx.xxx.xxx)
sec-dns (setup the secondary DNS server in the format of xxx.xxx.xxx.xxx)
syslogd (enable or disable system logging)
syslogd-server (setup the server for log files in the format of xxx.xxx.xxx.xxx)
tcp-keepalive (configure the time intervals between keep alives, 3-120 minutes)
telnet (configure user settings when using telnet to connect to the device)
escape-monitor (enable or disable the escape monitor)
escape-string (set the escape string, default is ‘+++inet’)
inactivity (enable or disable an inactivity timout)
inactivity-timeout (set the inactivity age time)
raw-mode (enable or disable raw mode)
telnet-port (set the telnet port number)
tftp (enable or disable TFTP)
udp (configure udp settings)
inactivity (enable or disable udp’s inactivity feature)
inactivity-timeout (set the inactivity timeout period)
terminate-monitor (enable or disable terminate-monitor)
terminate-string (set the terminate string)
eth0 (configuration options for Ethernet port eth0)
dhcp-client (enable or disable DHCP over eth0)
ip-address (set a static IP address and subnet mask)
o ppp ppp0 (Configure ppp settings for the ppp0 port)
auth-type (chap, pap, or pap-chap authentication types)
authentication (enable or disable authentication)
compression (enable or disable compression)
comp-type (bsd, deflate, or both compression types)
enable/disable (enable or disable ppp0)
password (set a ppp0 password)
raw-mode (enable or disable raw-mode)
username (set a ppp0 username)
(continued…)