Filter
Top Products
Rev. 041008
19
Software Configuration
Web Management
The 102PC-SE offers users the ability to remotely logon and configure the 102PC-SE through a web browser.
Note: By default the 102PC-SE has an IP address of 192.168.1.202 with a subnet mask of 255.255.255.0. If the 102PC-
SE sees a DHCP server on the network he will use that and acquire the next available IP address that the DHCP
server has in its DHCP pool. You must know what the IP address is before you can configure the 102PC-SE
through a web browser. If you need to you can configure a static IP address through the serial port.
Once an IP address has been configured for the unit it can be remotely configured through a web browser. To configure it
over a web browser simply enter the IP address in the web address line of the web browser.
You should be prompted to enter a user name and password. You can configure multiple user accounts.
Default Settings:
User Name: admin
Password: admin
Once logged in you will be confronted with the following page. Simply click on either link by default they both end up
loading to the same page.
Note: The Host Configuration page is available
to give the user a place to customize the
web management features for the serial
device that they attach to the 102PC-SE.
By default this page is simply forwarded
to the IPModule Configuration page.
N-Tron does NOT provide software
development support for users who wish
to customize the Host Configuration
page.