Filter
Top Products
12/15/05
13
Port LED’s
The display Mode is indicated by the LED pair labeled “Display Mode”, and the
state is given by the legend on the front of the 600 Series Switch. To transition
between these Display Modes, the Select/Set button must be pressed briefly
(similar to left mouse click). The four states are: Port Status, 100Mbit/s, Full
Duplex, Fault Mask.
Display Mode: Meaning
State = Port Status
OFF No Valid Connection to the port.
Green Valid Connection to the port (good link).
Flashes green once per cycle, port switched
to standby
Flashes green three time per cycle, port is
disabled by configuration
Yellow Indicates Port is actively receiving data
Display Mode: Meaning
State = 100 Mbps
OFF Port operating at 10 Mbps
Green Port operating at 100 Mbps
Display Mode: Meaning
State = Full Duplex
OFF Port operating half duplex
GREEN Port operating full duplex
Display Mode: Meaning
State = Fault Mask
OFF Port is not currently monitored
Green Port is currently monitored