N-Tron 604MFX-ST Switch User Manual


 
12/15/05
7
600 Series Hazardous Location Installation Requirements
1. WARNING! Do not disconnect while circuit is live, unless area is
known to be non-hazardous.
2. WARNING! Install only in accordance with Local & National
Codes of .Authorities Having Jurisdiction.
3. Class I, Div 2 installation requires that all devices connected to this
product must be approved for the area in which it is installed.
4. Only hazardous location approved wiring with temperature ratings
greater than 80 C permitted for Class I, Div 2 installations
operating at temperatures up to 60 C ambient.
Personnel Qualification Requirements
Only qualified personnel should be allowed to install and work on this
equipment. Qualified personnel are defined as individuals who are
familiar with the installation, assembly, startup, and operation of this
product and who possess the relevant qualifications for their work e.g.:
Training in or authorization for connecting up, grounding, or
labeling circuits and devices or systems in accordance with current
standards in safety technology.
Training in or authorization for the maintenance and use of suitable
safety equipment in accordance with current standards in safety
technology.
First aid qualification.
DIN-Rail Mounting
Install the unit on a standard 35mm Din-Rail. When installing the unit in an
enclosed cabinet, recess it to allow at least 3” of clearance for fiber optic
cable bend radius, and 2 inches for TX cables and power connections.
Please note the 600 Series units must be installed in the vertical orientation
for cooling purposes. In this orientation, the power connector is at the top
of the unit, and the signal cables exit from the bottom of the unit.
19” Rack Mounting
19” Rack mount kits are available. Please consult with your local sales
representative for price & availability. Order part number: 900-RM