Nuvo Video Display Systems – User Manual
Maintenance
WARNING:
Only facility-authorized maintenance personnel should perform maintenance on the
Nuvo Surgical Monitor. Maintenance performed by unauthorized personnel could
result in personal injury or equipment damage.
Cleaning/Sterilization
Cleaning:
CAUTION:
Care should be taken not to pour cleaning fluids onto the rotating joints or monitor.
It is recommended to use a moist cloth to wipe down the joints and monitor.
Ensure that no moisture seeps into the rotating joints or monitor.
Using enzymatic detergents aids in the decontamination process. Measure all detergents carefully,
and use them in accordance with the manufacturer’s instructions.
Take care to avoid the use of cleaning materials that contain high concentrations of alcohol or
chlorine as these may lead to premature aging of the monitor screen.
NOTE:
All surfaces which are within reach of staff should be cleaned between each surgical procedure.
Sterilization:
Sterilization, if desired, can be accomplished by using any FDA-cleared liquid sterilant. In areas
outside of the USA, follow individual facility policies addressing the use of liquid sterilants.
Manufacturer’s recommendations should always be followed.
Sterilizable Handle
After every surgical operation:
• Remove the handle from the lighthead
• Wipe with a disposable cloth
• Clean and disinfect in a suitable cleaning and disinfecting machine
• Sterilize the handle
M2Z00167 Page 12