Filter
Top Products
38 MediaShield User’s Guide – Version 4.0
C
HAPTER 3
Using the NVIDIA MediaShield RAID Management Utility
Assigning a Free Disk
To mark a disk as free, or not a part of any array, do the following:
1 Enter the system BIOS setup and make sure that the drive that you want to mark as free
is RAID enabled.
2 Enter the RAID BIOS and make sure that the drive is not part of any array (if one
exists).
3 Boot into Windows and run the MediaShield program.
The drive appears under the Free Disk section.
Figure 3.7 shows an example of the MediaShield display if you have a mirror array and
two free disks.
Figure 3.7
MediaShield Free Disk Information