Filter
Top Products
72 MediaShield User’s Guide – Version 4.0
C
HAPTER 3
Using the NVIDIA MediaShield RAID Management Utility
Migrating from RAID 0 to RAID 0—Adding a Disk to a Stripe Set
The following example shows you how to expand a RAID 0 array with two disks to
include an additional disk.
1 Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2 Boot to Windows, launch the MediaShield application, then follow the steps outlined in
“Creating a Striped Array” on page 47 to create a two disk stripe array.
When that is done, you should see a screen shot similar to the following:
Figure 3.53
RAID Array Created
Now that a two disk stripe array has been created, you can use the MediaShield convert
feature to migrate the array from a two-disk RAID 0 into a three-disk RAID 0 array.