Filter
Top Products
Installing and Configuring the NVIDIA nForce 650i Ultra Motherboard
58
OnChip IDE Channel0 [Disabled]
x Primary Master PIO Auto
x Primary Slave PIO Auto
x Primary Master UDMA Auto
x Primary Slave UDMA Auto
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]
IDE Function Setup
Press Enter to display the IDE Function Setup menu.
OnChip IDE Channel0
Use this function to
enable or disable the
onchip IDE Channel0.
When disabled, the
Primary Master/Slave
functions are changed to
Auto and cannot be changed.
Primary Master/Slave PIO
When
OnChip IDE Channel0 is set to [Enabled], you can select
a mode for the primary Master and Slave PIO. Select from
Auto,
or
Mode 1 through Mode 4.
Primary Master/Slave UDMA
When
OnChip IDE Channel0 is set to [Enabled], you can
disable the primary Master and Slave UDMA or set it to
[Auto].
IDE DMA transfer access
Use this function to enable or disable IDE DMA transfer access.
Serial-ATA Controller
This function allows you to enable specific SATA controllers,
enable all controllers, or disable all controllers. The options
available are
[SATA-0], [SATA-0+1], [Enable All], and
[Disabled].
IDE Prefetch Mode
Use this function to enable or disable the
IDE Prefetch mode.
OnChip IDE Channel0 [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
IDE DMA transfer access [Enabled]
Serial-ATA Controller [All Enabled]
IDE Prefetch Mode [Enabled]