Filter
Top Products
Using NVIDIA Software
81
between the last write and the subsequent Write command to the
same physical bank. Adjustable from 2 to 15 cycles.
CAS Latency
The CAS Latency (tCL) is the time (in number of clock cycles)
that elapses after the memory controller sends a request to read a
memory location and before the data is sent to the module's
output pins. The value shown cannot be changed.
Clock Drive Strength
This value is filled in by the system and can not be changed by
the user.
Command Per Clock
The Command Per Clock (tCPC) sets the Command Rate for the
memory controller. The value shown cannot be changed
Async Latency
This value is filled in by the system and can not be changed by
the user.
Adjust GPU Settings
Use this interface to adjust the graphics processing unit (GPU) on
your video card(s). You can override the shipped clock frequencies of
your GPU and GPU memory and set the GPU fan speed. Increasing
the clock speeds increases your GPU performance and may require
adjusting cooling to maintain the same level of reliability.