Filter
Top Products
42
ATR
O
2
N
2
TO SET - PC SAMPLING RATE
(while in the Surface Mode)
Factory set at 15 seconds, the Sampling Rate can be set at
values of 2, 15, 30, or 60 seconds, or 2, 5, or 10 feet (.5,
1.5, or 3 meters).
• Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
• Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
• Press the Left (Advance) button 16 more times.
• The graphics SR and SECS appear with the Sampling
Rate value flashing (Fig. 40).
• Press and release the Right (Select) button advance the
Rate one selection at a time.
• Press the Left (Advance) button to accept the setting and
advance to Set Digital Gauge Mode, or press and hold
Both buttons for 2 seconds to revert to Surface Mode.
NOTE: Sampling
Rate is the
interval at which
data samples are
recorded during a
dive for subse-
quent download
to the PC pro-
gram. This
setting has no
effect on dis-
played data or
data in the unit's
viewable Log.
Fig. 40 - Set PC Sampling Rate