Filter
Top Products
3 - English
English
Menu Settings Table
The settings listed below are the changes or additions to those listed in the User's Guide.
For a complete explanation of the menu and each menu item, refer to the User's Guide, "Using Your Printer, Menu
Mode, Explanations of Menu Items."
The User's Guide is provided as an Adobe Acrobat file on the CD provided with your printer.
The table below shows the items that may appear in the menu. Settings which are engaged at the factory (defaults)
are set in bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group Item
Settings
(Defaults are set in bold italic)
Symbol Sets
(ML390/391 Series
printers only)
Code Page
USA, Canada French, Multilingual, Portugal, Norway,
BRASCII, Abicomp, Multilingual 858, ISO 8858-15
Top Feed Form Tear-off
Form Tear-off only appears when an optional Roll Paper
Stand is installed.
OFF, 500 ms, 1 sec, 2 sec
Set-Up CSF Bin Select
CSF Bin Select only appears when an optional Dual Bin Cut
Sheet Feeder is installed.
Bin 1, Bin 2
CSF Type
CSF Type only appears when an optional Cut Sheet Feeder is
installed.
Wide, Narrow
ESC SI Pitch 17.1 CPI, 20 CPI
Serial I/F Serial I/F only appears when an optional Serial Interface board is installed.
Parity None, Odd, Even
Serial Data 7/8 Bits 8 Bits, 7 Bits
Protocol Ready|Busy, X-ON/X-OFF
Diagnostic Test No, Yes
BusyLine SSD -, SSD +, DTR, R TS
Baud Rate
9600, 4800, 2400, 1200, 600, 300, 38400, or 19200 BPS
38400 BPS is displayed only when an optional serial
interface board with 38400 firmware is installed.
DSR Signal Valid, Invalid
DTR Signal Ready on Power Up, Ready on Select
Busy Time 200 ms, 1 sec
CSF Bin 1 CSF Bin 1 only appears when an optional Cut Sheet Feeder is installed.
Line Spacing 6 LPI, 8 LPI
Bottom Margin Valid, Invalid
Page Width
13.6", 8"
The setting for Page Width affects both Bin 1 and Bin 2.
On a wide-carriage printer (321, 391), when Page Width is
set to 8", the printer prints 8" wide lines, not the full width
of the printer.
Page Length 11", 11 2/3", 12", 14", 17", 3.5", 4", 5.5", 6", 7", 8", 8.5"
CSF Bin 2 CSF Bin 2 only appears when an optional Dual Bin Cut Sheet Feeder is installed.
Line Spacing 6 LPI, 8 LPI
Bottom Margin Valid, Invalid
Page Length 11", 11 2/3", 12", 14", 17", 3.5", 4", 5.5", 6", 7", 8", 8.5"