Filter
Top Products
Printer drivers > 37
P
RINTER
DRIVERS
This chapter describes how to install a printer driver on two types of operating system –
Windows and Macintosh.
The printer drivers are all contained on the printer driver CD-ROM (CD1). Please refer to
the readme file on this CD for the latest information on printer driver installation.
W
INDOWS
OPERATING
SYSTEMS
1. With Windows running, insert the printer driver CD-ROM (CD1) into your CD-ROM
drive.
2. If the CD does not run automatically, use Start > Run... and enter E:\setup (where E
is your CD-ROM drive) in the Open field.
3. Click on OK.
4. Select your printer model.
5. Click on Driver Installation > Install Printer Driver and follow the on-screen prompts
to complete your printer driver installation.
6. For the B410d and B410dn only, once the driver has
been installed, the Printer Menu Setup tool (at
right) is then automatically installed and the operator
panel language switching utility will run automatically.
7. For the B420dn and B430dn, once the driver has been
installed, the operator panel language switching utility
will run automatically. Choose your preferred operating
language. See “Changing language” on page 13.
I
NSTALLED
OPTIONS
Certain options may have been installed in your printer. For
those that are installed, check that they appear enabled on
the Menu Map.
Ensure that your options are set up in the printer driver(s) by
making the appropriate settings on the Device Options tab
(PCL emulation) and/or Device Settings tab (PS emulation)
described in the chapter entitled “Operation”.
M
ACINTOSH
OPERATING
SYSTEMS
Please refer to the readme file on the CD for details on installing the appropriate Macintosh
drivers.
I
NSTALLED
OPTIONS
Ensure that any installed options are enabled in the printer driver.
C
HOOSING
A
M
AC
DRIVER
The B410d, B410dn and B420dn models allow you to use only a PCL Mac driver.
The B430dn models can also use a PS driver on Macintosh operating systems.
NOTE
Take time to note the facilities available on the CD. For example, the Help
facility briefly describes each of the Software Utilities.