Filter
Top Products
C5650n/C5650dn User’s Guide
Lists of Available Settings by Menu • 96
System Adjust Menu
This item appears if enabled by a System Administrator.
Notes:
• Factory default settings are shown in bold.
Item Settings Explanation
X ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
horizontally in 0.25
increments.
Y ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
vertically in 0.25 increments.
DUPLEX X ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
of print face horizontally in
0.25 increments.
DUPLEX Y ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
of print face vertically in 0.25
increments.
DRUM CLEANING OFF
ON
If you are experiencing
horizontal white lines on your
printed pages, enter the
menu and temporarily
change this setting to ON,
then send a one page print
job. This will cause an extra
blank sheet to print, cleaning
the drum prior to printing.
Careful! Leaving this set to
ON will reduce the image
drum life.