Filter
Top Products
UNIX 112
# arp –s 192.168.20.127 00:80:92:01:00:D2 temp
The Ethernet address (MAC address) 00:80:92:01:00:D2 in the above
example can be determined from the network card self-diagnostic
test.
EthernetBoard OkiLAN 7300e Version 1.1.x
*** Diagnostic report ***
ROM Check: Ok Stat: 8166 FFFF 0000 0000
RAM Check: Ok Stat: 0000 0000 0000 0000
NIC Check: Ok addr: 00: 80: 92: 01: 00: D2
10BASE-(TPI)
EPROM Check : Ok Stat: 884B 884B 0000 0000
DIPSW1 : OFF (ON: Test use only)
DIPSW2 : OFF (ON: Initialize configuration)
DIPSW3 : OFF (ON: Reserved)
DIPSW4 : OFF (ON: Diagnostic print)
3. Use the ping command to confirm the connection with the
network interface card.
Example: for IP address 192.168.20.127
# ping 192.168.20.127
If there is no reply, there is a problem with the configuration of the IP
address (the IP address has been already set manually or DHCP/RARP
server may run), or with the network. Reset the network interface card
settings to default and try to set temporary IP address.
If you still have the problem after resetting the network interface card,
consult the network manager.
4. Login to the network interface card using TELNET.