Filter
Top Products
OPERATION > 61
Advanced tab
1. You can specify which times of day your printer will be available.
2. Indicates current priority, from 1 (lowest) to 99 (highest). Highest
priority documents will print first.
3. Specifies that documents should be spooled (stored in a special
print file) before being printed. The document is then printed in
the background, allowing your application program to become
available more quickly. Options follow:
This specifies that printing should not start until the last page has
been spooled. If your application program needs a lot of time for
further computation in the middle of printing, causing the print job
to pause for more than a short period, the printer could prematurely
assume that the document has finished. Selecting this option would
prevent that situation, but printing will be completed a little later,
as the start is delayed.
This is the opposite choice to the one above. Printing starts as soon
as possible after the document begins spooling.
4. This specifies that the document should not be spooled, but
printed directly. Your application will not normally be ready for