Filter
Top Products
TROUBLESHOOTING > 78
for use with your printer. See your software documentation for more
information.
HARDWARE PROBLEMS
Symptom Problem Solution
Printing is garbled. Incorrect driver is
installed.
Install an appropriate driver.
Printer’s output is
below rated speed.
Much of the printing
delays will be caused by
your application.
Sometimes purely text
documents will print
slowly depending on the
selected fonts and how
they are transferred to the
printer.
For maximum speed, use text in your
document and use a printer resident font.
Size of top margin
increases with each
page printed.
Creeping text. Number of
lines per page in software
is not equal to number of
lines per page of printer.
Many software packages assume 66 lines
per page, but your printer’s default is 64.
Adjust software accordingly, or set LINES
Per PAGE in the soft control panel to equal
lines per page in your software.
Symptom Problem Solution
Graphic image prints
partly on one page,
partly on the next.
Insufficient printer
memory for this image at
this resolution.
Change the resolution, reduce the image
size, or install more memory in your printer.
When you try to print
nothing happens, but
printer indicates it is
ready to receive data.
Configuration error. Check cable connection. If more than one
printer is available, make sure your printer
has been selected.
Garbage prints. Incorrect cable
configuration. Also, see
Software Problems.
Check cable configuration, continuity, and
length.
Printer freezes or
displays error
message when
computer is rebooted.
Booting the computer
while the printer is on
can cause a
communications error.
Turn printer off before rebooting computer.
Odors. Gases are given off by
forms or adhesives
passing through the hot
fusing unit.
Make sure the forms you use can withstand
heating, and provide adequate ventilation.