Oki C3200 Printer User Manual


 
The Status Monitor> 44
C
OLOUR
MENU
The printer automatically adjusts colour balance and density at
appropriate intervals, optimising the printed output for bright
white paper viewed in natural daylight conditions. The items on
this menu provide a means of changing the default settings for
special or particularly difficult print jobs. Settings revert to their
default values when the next print job is complete.
COLOUR MENU
ITEM SETTINGS EXPLANATION
DENSITY
CONTROL
AUTO
MANUAL
If set to AUTO, image density will be
automatically adjusted at power on,
when a new image drum or toner
cartridge is installed, and at intervals
of 100, 300 and 500 drum counts. If
a 500 drum count interval occurs
during a print job it will occur at the
end of that job, and will take up to
55 seconds. If set to MANUAL, this
adjustment will only be performed
when initiated by the next menu
item.
ADJUST
DENSITY
EXECUTE Selecting this will perform the auto
density set up immediately.
AJST
REGISTRATION
EXECUTE Performs automatic colour
registration adjustment. Normally
this is done on power on and when
the top cover is opened and then
closed. This process accurately
aligns the cyan, magenta and yellow
images to the black image.
C REG FINE
ADJUST
M REG FINE
ADJUST
Y REG FINE
ADJUST
-3~0~+3
-3~0~+3
-3~0~+3
Performs fine adjustment of image
timing in relation to the black image
component.