Filter
Top Products
Menu functions > 54
H
OW
TO
CHANGE
THE
SETTINGS
- A
DMINISTRATOR
You can set whether to ENABLE or DISABLE each category in
the user menu.
Disabled categories are not displayed in the User’s menu. Only a
system administrator can change these settings.
1. Turn OFF the printer.
2. Turn ON the printer while pressing the ENTER button.
When ADMIN MENU appears, take your finger off the
button.
3. Press the ENTER button.
4. When ENTER PASSWORD appears, press the MENU+ or
MENU- button several times to display the 1st line of the
password and then press the ENTER button.
5. Enter your 4- to 9-digit password.
The default password is aaaaaa.
6. Press the MENU+ button until the “category” you want to
change is displayed.
7. When it is, press the ENTER button.
8. Press the MENU+ button or MENU- button until the
“item” you want to change is displayed.
9. When it is, press the ENTER button.
Initialization of the flash memory prompts with the
message ARE YOU SURE?. Confirm whether the change
may be executed or not.
10. To execute it, press the MENU+ button or MENU- button
to display YES and then press the ENTER button. The
printer automatically reboots.
11. When PLEASE POW OFF/SHUTDOWN COMP is
displayed, turn the printer OFF/ON
12. Press the MENU+ button or MENU- until the “setting”
you want is displayed.)
13. Press the ENTER button to enter an asterisk (*) on the
right side of the setting selected.
14. Press the
ONLINE button to switch to ONLINE.